Featured Product

Valde Systems VS151

Valde Systems has introduced the first camera designed specifically for outdoor autonomous vehicle operation. Now you don't have to choose between cheap, poor-quality security cameras and expensive, but fragile, machine-vision cameras.

The VS151 combines convenient size, ruggedness, and capability with a price you can afford.

Learn more




Accessories

VS1501R-OPNR-R0

This tool greatly simplifies the removal of the VS1501R circuit board from its enclosure. Simply screw it into the connector holes to spread all the fingers simultaneously and slide the board out.

VS1501R-CBL-R0

This set of breakout cables helps testing and debug of VS1501R applications on the bench. It allows you to connect the board to a power supply and has breakout connectors for two FireWire cameras, a video monitor, RS-232 serial port, and an Ethernet interface.

VS151-SCBL-R0

This cable is for connecting a VS151 camera to a standard FireWire interface. On one end of this 3 meter long cable is a standard 6-Pin FireWire connector, and on the other end is a mating cable for the VS151 camera with pigtails for the general purpose inputs and outputs.

VS151-CCBL-R0

If you are replacing a camera that used a standard FireWire cable with the VS151 this 1 meter long conversion cable will allow you to do it. On one end is a mating connector for the VS151 with pigtails for the general purpose inputs and outputs, and on the other end is a female FireWire connector to allow you to simply plug the old cable directly in.

VS151-MCON-R0

This is the mating connector for the VS151 if you will be making your own cable. It consists of three parts, the shell, insert and pins, which must be ordered as a set.

VS151-ERNG-R0

Some standard C/CS mount lenses are longer than will fit under the standard lens cover. If this is the case, simply screw on this extension ring to add 1.32 inches in length.

VS151-LCVR-R0

If the VS151 is going to be operated in an environment that is dusty or would benefit from a optical filter the lens cover is what you need. It simply screws onto the VS151 over the lens and accepts standard photographic filters.